Chopped Strand Mat - Emulsion - Chopped Strand Mat - Emulsion Exporter, Manufacturer & Supplier, Coimbatore, India

Chopped Strand Mat - Emulsion

Product Description

Description

Binani Chopped Strand Mat is made of randomly, yet evenly distributed strands, chopped from continous "E" - glass fibres into 50 mm length, bonded with "emulsion binder", possesses excellent surface bonding efficiency.

Properties

Easy air removal and rapid resin impregnation.
Drapes well to suit the surface of intricate moulds.
Fast wet-through and wet-out due excellent Styrene solubility of binder.
Easy handling and better appearance of the composite parts.
Good surface bonding and high strand integrity. Compatible with Unsaturated Polyester resins.

Approvals

Major National and International product accreditations.

Characteristics

Conforming to:- BS:3496

Characteristics	Limits	Nominal Value
Characteristics	Limits	225g/m2	300g/m2	375g/m2	450g/m2	600g/m2	900g/m2
Width (cm)	+3, -0	100	100	100	100	100	100
Average mass / area (gsm)	± 8%	225	300	375	450	600	900
Moisture content %	0.20 max	0.20 max	0.20 max	0.20 max	0.20 max	0.20 max	0.20 max
Loss on Ignition %	± 2%	5.0	5.0	5.0	4.0	4.0	4.0
Strand Length (mm)	± 2	50	50	50	50	50	50
Strand Tex (g/Km)	± 2	32	32	32	32	32	32
Wet-out Time (Minutes)	± 2	3.5	3.5	4.0	4.0	4.5	5.0
Filament Diameter (Microns)	± 2	11	11	11	11	11	11
Roll Lengths (Meters)	± 5	110	100	85	65	50	40
Roll Weight (Kilos)	± 5	30	30	30	30	30	30
Pallet Weight (Kilos) Nett	± 20	480	480	480	480	480	480

# Other densities and widths available on request, e.g. 95, 125, and 150cm. Normally supplied with one trimmed edge.

Packaging

Each roll is wound on cardboard tubes 10cm internal diameter x mat length.
Each roll is covered in polyethylene bags and packed in Corrugated cartons (27cm x 27cm) x standard length.
16 cartons per pallet are packed vertically, with stretch wrap protection.
Pallet dimensions are 110cm. x 110cm.

Storage

Rolls should be protected from sun and to be stored vertically.
Recommended storage conditions
- - Temperature 40°C max.
- - Relative Humidity 75% max.
To avoid moisture condensation, store packages for 24 hours under workshop conditions, before use.